Resetting The E1 Ntu; Download Operations - Paradyne 3350 User Manual

The active user interface is released. A screen with
this message appears. No user interface is active
until input is received from a user interface.
Ft. Panel:
Released
F1

Resetting the E1 NTU

Use the Reset command to perform a power-on reset of
the E1 NTU.
To reset the E1 NTU,
1. From the top-level menu screen, press the
until the Ctrl selection appears on the screen.
E1 HDSL NTU
Stat
F1
2. Select Ctrl.
E1 HDSL NTU
Test
F1
3. From the Control screen, press the
the Reset selection appears on the screen.
Control:
Rel
F1
3350-A2-GB20-10
F2 F3
key
Test Cnfig
F3
F2
Cnfig Ctrl
F2 F3
key until
ClrReg
F2 F3
June 1996
4. Select Reset.
Control:
ClrReg Reset
F1
5. From the Device Reset screen, press F1 to initiate
a reset of the E1 NTU (the power-up sequence
screen appears). Press F2 instead to return to the
Control screen without initiating a reset.
Device Reset:
Yes
F1

Download Operations

NOTE
The Download command is for
use by AT&T Paradyne personnel
only. Loss of primary data could
result from improper use.
Operation
F2 F3
No
F2 F3
3-19