Paradyne 3350 User Manual page 27

ACCULINK 3350 E1 NTU
Name Color
SIG Green
OOF Yellow
ALRM Yellow
PDV Yellow
BPV Yellow
3-6
Table 3-3
G.703 DTE Port LEDs
Monitors the signal being received from the G.703 DTE port.
ON : A recoverable signal is being received from the G.703 DTE port.
OFF :
The signal cannot be recovered from the G.703 DTE port (a Loss of
Signal condition exists).
Monitors Out Of Frame (OOF) conditions on the received G.703 DTE signal.
ON : At least one OOF was detected on the signal during the sampling
period.
OFF : No OOFs were detected on the signal during the sampling period.
Indicates whether an alarm condition exists on the received G.703 DTE signal.
ON : An alarm condition (LOS, LOF, EER, RAI, AIS, RMA, MFA) exists on the
received G.703 DTE signal. Use the Device Health and Status
command to determine the alarm type.
OFF : No alarm condition exists on the G.703 DTE Interface signal.
Monitors Pulse Density Violations (PDV) on the received G.703 DTE signal.
ON : At least one PDV was detected (and corrected) on the received
G.703 DTE signal during the sampling period.
OFF :
No PDVs were detected on the received G.703 DTE signal during
the sampling period.
Monitors Bipolar Violations (BPV) on the received G.703 DTE signal.
ON :
At least one BPV was detected (and corrected) on the received
G.703 DTE signal during the sampling period.
OFF : No BPVs were detected on the received G.703 DTE signal during
the sampling period.
June 1996
Meaning
3350-A2-GB20-10