Paradyne 3350 User Manual page 119

ACCULINK 3350 E1 NTU
Cust1 (Customer 1) configuration area
functional description, 3-9
in the menu tree, A-1
Cust2 (Customer 2) configuration area
functional description, 3-9
in the menu tree, A-1
cyclic redundancy check (CRC)
configuration option, C-2, C-3
error indication, 4-8
D
daisy chaining
configuration options, C-5, C-7
connectivity, 1-4, 2-2, 2-3
database, SNMP, 1-2
dc power option, 2-4–2-6, B-1, D-6
default configuration options, C-1
DevFail (Device Failure) message, 4-4
DevHS (Device Health and Status) branch
example of use, 4-3–4-4
in the menu tree, A-1
dimensions, B-2
DL (Download) branch
in the menu tree, A-1
operation, 3-19
DTE (G.703) interface. See G.703 DTE interface
DTE Configuration branch
in the menu tree, A-1
option table, C-2
option worksheet, C-15
DTE loopback (DLB), 4-17
configuration option, C-2
external control interface, D-2
E
EER (Excessive Error Rate) condition
ASCII terminal/printer message, 4-10
Device Health and Status message, 4-3
front panel LED indication, 3-5, 3-6
Performance Report message, 4-9
troubleshooting, 4-13
enterprise-specific trap, 4-11
environmental specifications, B-2
equipment list, H-1
error messages. See messages, alarm
ES (Errored Seconds) report, 4-8
Index-2
F
Facility Data Link (FDL)
configuration option, C-3
used with SNMP system, 1-2, 2-2, 2-3, F-1
Fact (Factory) configuration area
functional description, 3-9
in the menu tree, A-1
failure analysis. See troubleshooting
failure message
during power-up self-test, 2-8, 4-4
troubleshooting, 4-13
feature numbers, H-1
features, 1-1–1-2
FEBE (Far-End Block Error) report, 4-9
framing configuration option, C-2, C-3
front panel
acquiring/releasing the user interface, 3-18–3-19
operation, 3-2–3-6
physical description, 1-3, 3-2
Front Panel Emulation
cabling example, 2-7
feature number, H-1
functional description, 1-2, 3-2, G-1
installation and operation, G-1–G-2
G
G.703 DTE interface
configuration options, C-2
failure message, 4-2
front panel LED indications, 3-6
functional description, 1-2, 1-4, 2-1
managed by SNMP, 1-2
physical description, 1-4
pin assignments, D-2
technical specifications, B-1
troubleshooting, 4-12
Gen (General) Configuration branch
in the menu tree, A-1
option table, C-4
option worksheet, C-15
H
HDB3 (High Density Bipolar 3) coding
configuration option, C-2
Self-Test Health message, 4-2
HDSL (High bit-rate Digital Subscriber Line) branch
example of use, 4-5
in the menu tree, A-1
HDSL network. See network interface
June 1996 3350-A2-GB20-10