Paradyne 3350 User Manual page 121

ACCULINK 3350 E1 NTU
P
part numbers, H-1
pattern tests, 4-19–4-20
payload loopback (PLB), 4-16
PBX applications, 2-1
PDV (Pulse Density Violation) condition, 3-6
Perf (Performance Report) branch
example of use, 4-6–4-7
in the menu tree, A-1
performance reporting, 4-6–4-9
physical description of E1 NTU, 1-3–1-5, B-2
pin assignments, D-1–D-6
Point-to-Point Protocol (PPP)
procedure for configuring, 3-13
used with SNMP system, 1-2, 2-2, 2-3, 3-11, F-1
power input
cabling example, 2-7
connector, 1-4, D-6
consumption, B-1
optional power sources, 2-4–2-6, B-1, D-6
requirement, B-1
troubleshooting, 4-12
power module, 1-4, B-1
power-up self-test
displaying results, 4-2
front panel indications, 2-8, 3-5
troubleshooting, 4-12
problem determination. See troubleshooting
protocol, link layer, 3-11, 3-13–3-14
Ptrns (Test Patterns) branch
example of use, 4-19–4-20
in the menu tree, A-1
R
RAI (Remote Alarm Indication) condition
ASCII terminal/printer message, 4-10
Device Health and Status message, 4-4
front panel LED indication, 3-5, 3-6
Performance Report message, 4-9
troubleshooting, 4-12
rate
auxiliary port, C-7
communications port, C-6
rear panel
connectors. See connectors, rear panel
physical description, 1-3–1-5
switch, 1-4
Rel (Release) branch
example of use, 3-18–3-19
in the menu tree, A-1
repeater loopback (RLB), 4-17–4-18
Index-4
reset
front panel indications, 2-8
procedure, 3-19
Reset branch
example of use, 3-19
in the menu tree, A-1
RMA (Remote Multiframe Alarm) condition
ASCII terminal/printer message, 4-10
Device Health and Status message, 4-4
RX network connector, 1-4
RX shield, 1-4
S
self-test
displaying results, 4-2
front panel indications, 2-8, 3-5
troubleshooting, 4-12
Send Ones configuration option, C-2
Serial Line Internet Protocol (SLIP)
procedure for configuring, 3-13
used with SNMP system, 1-2, 2-2, 3-11, F-1
SES (Severely Errored Seconds) report, 4-8
shield, RX, 1-4
SNMP (Simple Network Management Protocol)
agent, 1-2
configuration options
examples of use, 3-11–3-15, 3-16–3-17
menu tree branches, A-1
option table, C-9–C-14
option worksheet, C-16
connection examples, 2-2–2-3, 2-7, F-1–F-2
database, 1-2
IP addressing, F-1–F-2
manager, 1-2
MIBs
functional description, 1-2
list of objects, E-1–E-16
procedure for configuring access, 3-14–3-15
objects, 1-2
principles of operation, 1-2
SNMP Down message, 4-4, 4-13
traps
functional description, 1-2, 4-11
procedure for configuring, 3-16–3-17
specifications, environmental, B-1, B-2
Stat (Status) branch
examples of use, 3-7, 3-9, 4-2, 4-3, 4-5, 4-6, 4-22
in the menu tree, A-1
status messages. See messages, status
STest (Self-Test Health) branch
example of use, 4-2
in the menu tree, A-1
StEvnt (Status Event) report, 4-9
straps. See configuration options
subnet, 3-11, C-10, C-11, C-12, F-1
switch, rear panel, 1-4
June 1996 3350-A2-GB20-10