Table of Contents
Advertisement
If you select Fixed or Fixed Adaptive for the port mode, you will need to specify
upstream and downstream parameters as well. Configuration fields for data
rates will not appear until you Submit (Section 4.1.2.11) the Fixed or Fixed
Adaptive port mode selection.
AIM24000 Installation 210-0000056 rev 01
4.1.2.3.1 Fixed
Enter the desired upstream (Up) and downstream (Dn) rates (kbps) in the
corresponding fields.
4.1.2.3.2 Fixed Adaptive
Enter the desired maximum boundaries, for both upstream (Up) and
downstream (Dn) rates (kbps), in the corresponding fields.
Page 25 of 44
Advertisement
Table of Contents
Need help?
Do you have a question about the AIM24000 and is the answer not in the manual?