Advertisement
Quick Links
CAUTION
Net to Net Technologies strongly recommends the use of proper electrostatic discharge (ESD) precautions
when handling this equipment.
INSTALLATION
1. Unpack and inspect the IAM144-12.
If there is visible damage, do not attempt to connect the device; contact Customer Support at 1-
877-638-2638 (001-603-427-0600 for international customers) or Support@NetToNet.com.
2. Install the IAM144-12 in an IP DSLAM chassis.
NOTE
There must be a Multiplexer Uplink Module installed in the IP DSLAM chassis in order for Access Modules to
operate.
All Access Multiplexer Modules for Net to Net Technologies' IP DSLAMs are hot swappable;
installing or removing an Access Module while the chassis is powered up does not affect the
operational status of other Access Modules within the chassis. The IPD12000 is a fourteen slot
chassis; slots 1-12 are reserved for Access Modules (such as the IAM144-12) and slots 13-14 are
reserved for Multiplexer Uplink Modules (such as the MUM200-2). Access Modules may be
placed in any order in slots 1-12. The IPD4000 is a five slot chassis; slots 1-4 are reserved for
Access Modules and slot 5 is reserved for a Multiplexer Uplink Module.
a. Align the IAM144-12 with the slot module guides of the chosen slot for installation (slot 1-
12 on the IPD12000 or slot 1-4 on the IPD4000).
b. Slide the IAM144-12 firmly into the chassis. DO NOT USE EXCESS FORCE.
c. Secure the IAM144-12 by tightening the fastening screws on the module faceplate.
d. Verify that the PWR (Power) LED on the IAM144-12 faceplate is illuminated.
210-0000027 rev03
IAM144-12
12-Port IDSL Access Multiplexer
Interface Module User Guide
Advertisement
Related Manuals for Net to Net Technologies IAM144
Summary of Contents for Net to Net Technologies IAM144
- Page 1 1-12. The IPD4000 is a five slot chassis; slots 1-4 are reserved for Access Modules and slot 5 is reserved for a Multiplexer Uplink Module. a. Align the IAM144-12 with the slot module guides of the chosen slot for installation (slot 1- 12 on the IPD12000 or slot 1-4 on the IPD4000).
- Page 2 IDSL Ring 1 NOTE Once the IAM144-12 has been installed, bandwidth and other configurations are software selectable via Net to Net Technologies' Network Management System (NMS). For further information regarding Access Module management and configuration please refer to the Management User Guide for IP and Mini DSLAMs.
-
Page 3: Default Settings
Information Technology Manager. Default Settings No configuration is necessary for the IAM144-12 to operate at default settings. If however, a change is required, default settings can easily be modified within NMS. For information regarding specific parameter configurations, refer to the Management User Guide for IP and Mini DSLAMs. -
Page 4: Circuit Configuration
(RAM) of the IAM144-12 and the Non-Volatile Random Access Memory (NVRAM) of the MUM. While data stored in IAM144-12 RAM will be erased if the unit loses power, data stored within MUM NVRAM will remain intact (even if the unit loses power) unless deliberately cleared or reconfigured. -
Page 5: Led Indicators
Additional Information unit is operational If the Power LED is not illuminated, it is unlikely the IAM144-12 is receiving power and none of the LEDs will be illuminated. IDSL connection is The IDSL link is operational and traffic is flowing. - Page 6 Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Industry Canada Regulatory Compliance Information for Class A Equipment This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada. European Regulatory Compliance Information for Class A Equipment This Class A product complies with European Norm EN55022.