Table Of Contents - Net to Net Technologies AIM24000 User Manual

Contents
1.0 ADSL2+ INVERSE MULTIPLEXER MODEL TYPES
1.1 AIM24000-48
1.2 AIM24000-48B
2.0 INSTALLATION
2.1 Unpack and Inspect the AIM24000
2.2 Install the AIM24000 in an IP DSLAM
2.2.1 12-Slot IP DSLAM
2.2.2 4-Slot IP DSLAM
2.3 Verify Power Reception
2.4 Connect Your ADSL Cable(s)
2.4.1 Local Connection
2.4.2 Remote Connection
2.4.3 ADSL RJ21 Pinout
2.5 Verify the ADSL Connection(s)
3.0 ADSL Parameters
3.1 Default Configurations
3.2 Parameter Definitions
3.2.1 Circuit ID
3.2.2 Standard Mode
3.2.3 Port Mode
3.2.4 Bandwidth and Distance
3.2.5 IP Range
3.2.6 VLAN
3.2.7 Backbone-VLAN
3.2.8 VLAN Priority
3.2.9 Protocol
AIM24000 Installation 210-0000056 rev 01
2.2.1.1 Select a Slot for Installation
2.2.1.2 Align the AIM24000 with the Slot Module Guides
2.2.1.3 Slide the AIM24000 Firmly into the Chassis
2.2.1.4 Secure the AIM24000 in the Chassis
2.2.2.1 Select a Slot for Installation
2.2.2.2 Align the AIM24000 with the Slot Module Guides
2.2.2.3 Slide the AIM24000 Firmly into the Chassis
2.2.2.4 Secure the AIM24000 in the Chassis
2.4.1.1 12-Slot IP DSLAM
2.4.1.2 4-Slot IP DSLAM
3.2.2.1 Multimode
3.2.2.2 Full Rate ADSL2
3.2.2.3 Full Rate ADSL
3.2.2.4 G.lite
3.2.3.1 Adaptive
3.2.3.2 Fixed
3.2.3.3 Fixed Adaptive
3.2.3.4 Off
3.2.4.1 Full Rate ADSL2
3.2.4.2 Full Rate ADSL
3.2.4.3 G.lite
3.2.5.1 Single IP Address
3.2.5.2 IP Address Range
3.2.5.3 Full IP Address Range
3.2.9.1 All
3.2.9.2 Select
Page 2 of 44