Table of Contents
Advertisement
3.1 Activate via Indoor Station
You can configure and operate the indoor station after creating a password for the device
activation.
Steps
1. Power on the device. It will enter the page of language settings.
2. After setting the language, it will enter the activation page.
3. Create a password and confirm it.
Note
You can click
4. Select OK to activate the indoor station.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
3.2 Activate via iVMS-4200 Client Software
You can only configure and operate the indoor station after creating a password for the device
activation.
Before You Start
Default parameters of indoor station are as follows:
Default IP Address: 192.0.0.64.
●
Default Port No.: 8000.
●
Default User Name: admin.
●
Steps
1. Run the client software, enter Device Management, check the Online Device area.
2. Select an inactivated device and click the Activate.
3. Create a password, and confirm the password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
Network Indoor Station User Manual
Chapter 3 Activation
to enable or disable password reveal.
4
Advertisement
Table of Contents
