Figure 4-49 Connect the Grounding Line to the Cover
11. Fix the cover with 2 socket head cap screws by using a
hexagon wrench (supplied).
5 Activation
5.1 Activate Device via Client Software
You can only configure and operate the door station after creating
a password for the device activation.
Default parameters of door station are as follows:
Default IP Address: 192.0.0.65.
●
Default Port No.: 8000.
●
Default User Name: admin.
●
Steps
1. Run the client software, click Maintenance and Management
→ Device Management → Device to enter the page.
2. Click Online Device.
3. Select an inactivated device and click Activate.
4. Create a password, and confirm the password.
Figure 4-50 Fix the Cover
34