Chapter 4 Activation; Activate Device Via Web; Activate Device Via Client Software - HIKVISION DS-KV6113-PE1 User Manual

4.1 Activate Device via Web

You are required to activate the device first by setting a strong password for it before you can use
the device.
Default parameters of the door station are as follows:
● Default IP Address: 192.0.0.65.
● Default Port No.: 8000.
● Default User Name: admin
Steps
1. Power on the device, and connect the device to the network.
2. Enter the IP address into the address bar of the web browser, and click Enter to enter the
activation page.
Note
The computer and the device should belong to the same subnet.
3. Create and enter a password into the password field.
4. Confirm the password.
5. Click OK to activate the device.

4.2 Activate Device via Client Software

You can only configure and operate the door station after creating a password for the device
activation.
Default parameters of door station are as follows:
● Default IP Address: 192.0.0.65.
● Default Port No.: 8000.
● Default User Name: admin.
Steps
1. Run the client software, click Maintenance and Management → Device Management → Device
to enter the page.
2. Click Online Device.
3. Select an inactivated device and click Activate.
4. Create a password, and confirm the password.
Video Intercom Villa Door Station User Manual

Chapter 4 Activation

12