Hardware Connection - Model 1754 - Paradyne 1752 SHDSL User Manual

1752 and 1754 SHDSL Router User's Guide
Hardware Connection – Model 1754
1. Connect one of the supplied RJ11 cables to the port marked DSL 1-2 at the back of the SHDSL
router. Connect the other end of the cable to the SHDSL source. Connect the other supplied
RJ11 cable to the port marked DSL 3-4. Connect the other end of the cable to the SHDSL source.
2. Insert one end of the RJ45 Ethernet cable into one of the LAN ports marked LAN on the back of
the SHDSL router. Connect the other end of the cable into the Ethernet Network Interface Card
(NIC) in your PC. Connect up to four Ethernet devices to the router. Use a crossover cable for a
hub.
3. Connect an earth ground to the grounding terminal (marked FG).
4. Connect the supplied external AC adapter into the DC power outlet on the back of the router.
Connect the power supply into your wall outlet or surge protector.
16 June 2005 1752-A2-GB20-00