Paradyne 1752 SHDSL User Manual page 53

•
Configure Intrusion Detection settings
Via the Advanced menu, click on Security and then the following page is displayed:
Enabling Security
You must enable Security before you can enable Firewall and/or Intrusion Detection. In the
Security State section:
1. Click on the Security Enabled radio button.
2. Click on
Enabling Firewall and/or Intrusion Detection:
You must create a security interface before you can enable Firewall and/or Intrusion
Detection.
Once you have created a security interface:
1. Click on the Firewall Enabled and/or Intrusion Detection Enabled radio buttons.
2. Click on
Setting a default security level:
You must have Security and Firewall enabled in order to set a default Security level.
1. From the Security Level section, click on the Security Level drop-down list.
2. Click on the level that you want to set: none, high, medium or low.
1752-A2-GB20-00
to update the Security State section.
to update the Security State section.
June 2005
1752 and 1754 SHDSL Router User's Guide
53