Windows 2000; Windows Me - Paradyne 1752 SHDSL User Manual

Windows 2000:

1. In the Windows task bar, click on the Start button, point to Settings, and then select
Control Panel.
2. Double-click on the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click on the Local Area
Connection icon, and then select Properties.
4. The Local Area Connection Properties dialog box is displayed with a list of currently
installed network components. If the list includes Internet Protocol (TCP/IP), the
protocol has already been enabled, in which case you can skip to Step 12.
5. If Internet Protocol (TCP/IP) does not appear as an installed component, click on
6. In the Select Network Component Type dialog box, select Protocol, and then click on
7. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click on
8. You may be prompted to install files from your Windows 2000 installation CD or other
media. Follow the instructions to install the files.
9. If prompted, click on
10. After restarting your PC, double-click on the Network and Dial-up Connections icon in
the Control Panel.
11. In Network and Dial-up Connections window, right-click on the Local Area
Connection icon, and then select Properties.
12. In the Local Area Connection Properties dialog box, select Internet Protocol
(TCP/IP), and then click on
13. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button labeled
Use the following IP address and type 192.168.1.x (where x is any number between 3
and 254) in the IP Address field. Type 255.255.255.0 in the Subnet Mask field.
14. Click on
Control Panel.

Windows Me:

1. In the Windows task bar, click on the Start button, point to Settings, and then click on
Control Panel.
2. Double-click on the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click on the Network icon, and
then select Properties.
4. The Network Properties dialog box is displayed with a list of currently installed network
components. If the list includes Internet Protocol (TCP/IP), the protocol has already
been enabled, in which case you can skip to Step 13.
1752-A2-GB20-00
.
.
.
to restart your computer with the new settings.
twice to confirm and save your changes, and then close the
June 2005
1752 and 1754 SHDSL Router User's Guide
.
19