Dhcp Server - Paradyne 1752 SHDSL User Manual

1752 and 1754 SHDSL Router User's Guide
b. Change the options for the existing virtual interface, then click on Change. The page is
reset and the new values are displayed.
To delete a service:
a. Click on the Delete link.
b. Check the details displayed, and then click on the Delete this connection button.

DHCP Server

This option allows you to enable or disable the DHCP server and create, configure, and
delete DHCP server subnets and DHCP fixed IP /MAC mappings.
From the Configuration menu, click on DHCP server. The following page is displayed:
Enabling/disabling the DHCP server
The DHCP server is enabled by default. If to disable the DHCP server, click on
Note: If DHCP relay is enabled, DHCP server will be disabled by default. You can not
enable DHCP server unless you disable DHCP relay.
38 June 2005
.
1752-A2-GB20-00