Paradyne 1752 SHDSL User Manual page 69

Option
Priority 1
Priority 2
Priority 3
Priority 4
Priority 5
Priority 6
Priority 7
3. Regenerated Priority to traffic class map, as shown in the following figure, specifies the
mapping of regenerated priority to their traffic class values.
The following table gives the range of values for each option which can be specified with this
command and a default value.
Option
Priority 0
Priority 1
Priority 2
Priority 3
1752-A2-GB20-00
Description
The regenerated user-priority to which the user
priority with value 1 in the incoming frame should
be mapped.
The regenerated user-priority to which the user
priority with value 2 in the incoming frame should
be mapped.
The regenerated user-priority to which the user
priority with value 3 in the incoming frame should
be mapped.
The regenerated user-priority to which the user
priority with value 4 in the incoming frame should
be mapped.
The regenerated user-priority to which the user
priority with value 5 in the incoming frame should
be mapped.
The regenerated user-priority to which the user
priority with value 6 in the incoming frame should
be mapped.
The regenerated user-priority to which the user
priority with value 7 in the incoming frame should
be mapped.
Description
The traffic class to which the regenerated priority of
value 0 is mapped.
The traffic class to which the regenerated priority of
value 1 is mapped.
The traffic class to which the regenerated priority of
value 2 is mapped.
The traffic class to which the regenerated priority of
June 2005
1752 and 1754 SHDSL Router User's Guide
Default value
1
2
3
4
5
6
7
Default value
0
1
2
3
69