Paradyne 1752 SHDSL User Manual page 77

Following table shows the definition of each field.
Valid
Policy Name
First SA Name
Protocol
Mode
Direction
SPI
SA Name
Click on View, and the IPSec SA Port Configuration page is invoked as follows.
1752-A2-GB20-00
Field
Created successfully
Name of the policy
Name of 1st security association
Each SA supports a single security protocol - AH or ESP. If
you want to use both protocols simultaneously, you need to
create a bundle of one or more SA pairs.
The SA mode - tunnel or transport:
• in tunnel mode you must also specify the source and
destination addresses (either IPv4 or IPv6) of the security
gateways that form the IPsec peers. You can also optionally
configure how IPsec deals with fragmentation and reassembly
of packets.
• in transport mode, the IPsec policy referenced in the
command provides the necessary source and destination
address information.
the direction of traffic that the SA will apply to
a unique identifier called the Security Parameter Index
Name of security association
June 2005
1752 and 1754 SHDSL Router User's Guide
Description
77