Back Panel Feature
DSL Connectors Description
DSL Connectors on back of the unit are RJ11 sockets. RJ11 uses a 6-position connector and
cable. Two wire pairs are used for SHDSL.
Restore Factory Defaults/Reboot Button
Press the reset button to reset the 1750 Series router to its factory default settings. If you
1752-A2-GB20-00
Figure 2-4. 2-wire 1752 rear view
Figure 2-3. 4-wire 1754 rear view
DC IN
Power Adapter Input
Reset Button
Reset device to factory default setting
CID
Connected to PC serial port for console
LAN
Connected to Ethernet Port
DSL 1–2 (1752)
Connected to loops 1 through 2
DSL 1–4 (1754)
Connected to loops 1 through 4
FG
Connected to ground wire
Pin
Pin 1
Not used.
Pin 2
Tip for DSL pair 2 or 4.
Pin 3
Tip for DSL pair 1 or 3
Pin 4
Ring for DSL pair 1 or 3
Pin 5
Ring for DSL pair 2 or 4
Pin 6
Not used.
1752 and 1754 SHDSL Router User's Guide
Usage
Purpose
June 2005
13