Paradyne 1752 SHDSL User Manual page 85

3. Click on the Line Probe drop-down list to set line probe as enable or disable.
4. Click on the Annex drop-down list to select the desired annex mode: A, B, A&B, F, G, or
F&G.
5. Click on the PSD drop-down list to set PSD as symmetric or asymmetric.
6. To set the maximum and minimum line rate, click on the Max Line Rate and Min Line
Rate drop-down list respectively (200 kbps to 5704 kbps).
7. To set the target margin, input the desired number in the target margin field (range: –6
to 21 dB).
8. Click on
9. To view the advanced status of SHDSL and Ethernet ports, refer to the system status
screen:
1752-A2-GB20-00
Wire Mode DSL Pair to Use
2-Wire Mode
4-Wire Mode
6-Wire Mode
8-Wire Mode
to submit your setting or
June 2005
1752 and 1754 SHDSL Router User's Guide
1
1,2
1,2,3
1,2,3,4
to clear your setting.
Illustration
DSL
1 2 3 4
85