Paradyne 1752 SHDSL User Manual page 29

1. In the Unit Id drop-down menu, set the device as CO or CPE, and then click on
to submit your setting.
2. To set the router's Wire Pair mode, click on the Wire Mode drop-down list to select the
Wire Pair number needed. Click on
Wire Pair
WirePair1
WirePair2
WirePair3
WirePair4
3. To set the maximum and minimum line rate, input the Max Line Rate and Min Line Rate
respectively (where values range from 192000 bps to 5696000 bps) and then click on
devices, the actual transmission rate will be presented in the Current Tx Rate attribute.
From the Port Configuration menu, click on eth1. The Eth1 Port Configuration page is
displayed:
1752-A2-GB20-00
DSL Pair to Use
1,2
1,2,3
1,2,3,4
to submit your setting. After the handshaking between STU-R and STU-C
June 2005
1752 and 1754 SHDSL Router User's Guide
to submit your setting.
1
1 2
Illustration
DSL
3 4
29