Paradyne 1752 SHDSL User Manual page 39

Creating a DHCP server subnet
Click on the Create new Subnet link. The following page is displayed:
2. This page allows you to:
•
Set the value and netmask of the subnet (either manually or by selecting an IP
interface whose value and mask is used instead), and set the maximum and default
lease times.
•
Set the DHCP address range (or use a default range of 20 addresses).
•
Set the Primary and Secondary DNS Server addresses or set your System to give
out its own IP address as the DNS Server address.
•
Set your router to supply its own IP address as the default Gateway address.
3. Once you have entered new configuration details for your DHCP server, click on
DHCP Server page is displayed, containing details of your new subnet.
1752-A2-GB20-00
1752 and 1754 SHDSL Router User's Guide
June 2005
. The
39