Paradyne 1752 SHDSL User Manual page 86

1752 and 1754 SHDSL Router User's Guide
Chapter 4 – Diagnostic and Troubleshooting
_____________________________________________________________________________________
Use the LEDs to determine the status of connections.
Description
Power LED, Ethernet LED, or
DSL LED is not lit.
Ethernet LED blinks green
when the line is first plugged
in. It should turn solid green
when the connection is
established.
DSL LED blinks green when
the line is first plugged in. It
should turn solid green when
the connection is established.
86
Suggestion
Check the appropriate connection.
If your Ethernet LED does not light, make sure
the RJ45 cable you are using is connected
properly. Use a straight-through or crossover
cable, as appropriate, for devices without
autosensing.
If the DSL LED does not stop blinking, the
router is training and the connection is not
established. Verify that your ISP user name and
password are correct, and the DSL link is
connected properly.
June 2005 1752-A2-GB20-00