Dhcp Relay - Paradyne 1752 SHDSL User Manual

1752 and 1754 SHDSL Router User's Guide

DHCP Relay

This option allows you to:
•
Enable and disable DHCP relay.
•
Add DHCP servers to the DHCP relay list.
•
Configure and delete server entries on the DHCP relay list.
From the Configuration menu, click on DHCP relay. The following page is displayed:
Enabling/disabling DHCP relay
This screen shows that the DHCP relay is currently disabled. If you click on the Enable button,
DHCP server is disabled and the button changes to Enable.
Note: If DHCP server is enabled, DHCP relay will be disabled by default. You can not enable
DHCP relay unless you disable DHCP server.
Adding a DHCP server to the DHCP relay list:
1. In the Add new DHCP server section, type an address in the New DHCP server IP address
text box.
2. Click on
42
. The address is displayed in the Edit DHCP server list section.
June 2005 1752-A2-GB20-00