Hardware Connection - Model 1752 - Paradyne 1752 SHDSL User Manual

Hardware Connection – Model 1752
1. Connect the supplied RJ11 cable to the port marked DSL at the back of the SHDSL router.
Connect the other end of the cable to your SHDSL source.
2. Insert one end of the RJ45 Ethernet cable into one of the LAN ports marked LAN on the back of
the SHDSL router. Connect the other end of the cable into the Ethernet Network Interface Card
(NIC) in your PC. Connect up to four Ethernet devices to the router. Use a crossover cable for a
hub.
3. Connect an earth ground to the grounding terminal (marked FG).
4. Connect the supplied external AC adapter into the DC power outlet on the back of the router.
Connect the power supply into your wall outlet or surge protector.
1752-A2-GB20-00
1752 and 1754 SHDSL Router User's Guide
June 2005 15