The following spanning bridge information is displayed and allows users to configure:
1. Spanning: spanning tree setting (true or false)
2. Priority: spanning tree priority value
3. Forward Delay: spanning tree forward delay time (seconds)
4. Hello time: spanning tree hello time (seconds)
5. Maximum Age: spanning tree maximum age (seconds)
Interface Configuration
Click on Interface configuration and then bridge interfaces page is displayed as shown in the
following figure.
The following table gives the range of values for each option which can be specified with this
command and a default value.
option
Name
PVID
Frame Access
type
Ingress filtering
1752-A2-GB20-00
Description
Interface name
Port VLAN Id (PVID) associated with the interface.
Acceptable Frame Type setting. Each bridge
interface can be configured to accept all frames or
only tagged frames.
Ingress Filtering Setting. Accepts VLAN tagged
frames, only if the VLAN Id in the frame has this
June 2005
1752 and 1754 SHDSL Router User's Guide
Default value
1
all
false
67