Setting Up Your System; Adjusting The Date And Time - i-SENS CareSens N POP Owner's Booklet

Setting Up Your System

Press and hold the
mode. After all settings are finished, press and hold the
button for 3 seconds to turn off the meter.
Press to reach the correct value. Press and hold
scroll faster.

Adjusting the Date and Time

Step 1 Entering the SET Mode
Press and hold the
3 seconds to enter the SET mode. After all
the segments flash across the screen, the
'SET' character will be displayed on the
screen.
Press the button again to progress to
the next step.
Step 2 Setting the Year
Press and release
correct year appears. After setting the
year, press the
your selection and progress to the next
step.
16 www.i-sens.com
button for 3 seconds to enter the SET
button for
to adjust until the
button to confirm
to