Preparing The Meter And Test Strip; Flagging Post-Meal Test Results - i-SENS CareSens N POP Owner's Booklet

Preparing the Meter and Test Strip

Step 7
Insert a test strip with the contact bars facing upwards into the
meter's test strip port. Push the strip in gently until the meter
beeps. Be careful not to bend the test strip. The
appear on the screen.

Flagging Post-meal Test Results

The CareSens N POP meter allows you to flag a result of a
post-meal test with (
can be attached just before applying the blood sample.
Once you attach the post-meal flag (
cannot be deleted.
Step 8
If you want to attach a post-meal flag
( ) to a test result, press and hold
for 3 seconds after inserting the test strip.
The post-meal flag (
symbol will appear on the screen.
The test result will also be displayed with the post-meal flag
( ). If you do not want to save the result as a post-meal
test, move on to step 9 after step 7.
) symbol. The post-meal test flag (
) to the test results, it
) and the
symbol will
)
29