Viewing Test Results Stored in the Meter's Memory
Step 1
Press the
button to turn the meter
on. The current date and time will be
displayed on the bottom of the screen
followed by the 1 day average value
and the number of the test results saved
within the current day.
Step 2
Use the
button to scroll through the test results, starting
from the most recent and ending with the oldest.
Press the
to return to the results seen previously. The test
date and the recorded temperature will display alternately.
After checking the stored test results, hold the
turn off the meter.
Note
The control solution test results saved with 'check' will be
displayed with 'check' when you review the stored test results.
button
button
The number of
tests within the
current day
button to
41