Setting Up Your System; Adjusting The Date And Time - i-SENS CareSens N Owner's Booklet

Setting Up Your System

Step 1 Entering the SET Mode
Press and hold the S button for
3 seconds to enter SET mode.
After all the segments flash
across the screen, "SET" will
show up.
Press the or button to
select "YES" and press the
S button to go to the next step.

Adjusting the Date and Time

Step 2 Setting the Year
Press the or button to adjust until the
correct year appears. When the present year
appears, press the S button to confirm your
selection and to go to the next step.
14 www.i-sens.com
Step 3 Setting the Month
A number indicating the month will blink on
the screen.
Press the or button until the correct
month appears. Press the S button to confirm
your selection and to go to the next step.
Step 4 Setting the Date
Press the or button until the screen
displays the correct date. Press the S button
to confirm the date and to go to the next
step.
Step 5 Setting the Time Format
The meter can be set in the AM/PM 12-hour
or the 24-hour clock format.
Press the or button to select a format.
The AM•PM symbol is not displayed in the
24-hour format. After selecting the format,
press the S button to go to the next step.
www.i-sens.com 15