Setting Up Your System; Adjusting Date, Time And Sound - i-SENS CareSens N Voice Owner's Booklet

Setting Up Your System

You should check and update the meter-settings such as time
and date before using your meter or after changing the meter
batteries.
Press and hold the S button for 3 seconds to enter the SET mode.
While you are setting the meter, current settings will appear on
the display. The meter will also announce each function when
the talking function is on. Press and hold ▲ or ▼ to scroll faster.
Whenever you want to complete the settings and exit from the
SET mode, press and hold the S button for 3 seconds again.

Adjusting Date, Time and Sound

Step 1 Entering the SET Mode
Press and hold S button for 3 seconds. After all
the segments flash across the screen, "SET" is
displayed on the screen. If the talking function
is on, the meter will say "Set meter. " Press the S
button again to go to the next step.
Step 2 Selecting a Language
The meter has a bilingual talking
function that can be used as a
verbal aid for using the meter and
hearing test results. When you enter
the language selection mode for
the first time, L1 will be blinking and
the meter will announce "Language
Selection" in the default language
(English). To select another
language (L2, Spanish), press the
▲ or ▼ button. Press the S button
to confirm the language and to go
to the next step.
14 www.i-sens.com
Step 3 Setting the Year
If the talking function is on, the meter will
say "Set year. " Press the ▲ or ▼ button until
correct year appears. After setting the year,
press the S button to confirm your selection
and to go to the next step.
Step 4 Setting the Month
A number indicating the month will blink
on the bottom left corner of the screen. If
the talking function is on, the meter will say
"Set month. " Press the ▲ or ▼ button until
the correct month appears. Press the
S button to confirm your selection and to go
to the next step.
Step 5 Setting the Date
The meter will say "Set date" when the talking
function is on. Press the ▲ or ▼ button until
blinking number shows the correct date. Press
the S button to set the date and to go to the
next step.
www.i-sens.com 15