Turning On The Hypoglycemia (Hypo) Indicator - i-SENS CareSens N POP Owner's Booklet

Turning on the Hypoglycemia (HYPo) Indicator

Step 10
In this mode the Hypoglycemia (possible
low blood sugar) level can be selected.
The 'HYPo' will be displayed with
hypoglycemia symbol
On pressing the
will display the On or OFF. Press the
button when 'On' appears to set the
hypoglycemia level.
Press the button until the correct
hypoglycemia level between 1.1 and
5.0 mmol/L is set. Press the
to confirm the level.
If you do not want to set the indicator,
press the button while the screen
displays 'OFF' . Then, the screen will
return to step 2. See page 15.
To confirm all settings, press and hold
the button for 3 seconds and the
screen will switch off.
Note
If the test result is lower than the pre-set
hypoglycemia level, the meter will display
the following.
Caution
Ask your healthcare professional to help you decide what your
hypoglycemia level is before setting your hypoglycemic level.
.
button, the screen
button
21