Setting The Strip Expiration Date Indicator - i-SENS CareSens N POP Owner's Booklet

Setting the Strip Expiration Date Indicator

The test strip expiration date indicator can be set in the
CareSens N POP meter. The strip expiration date is printed on
the test strip vial.
At any stage, if the
meter will be turned off.
To turn on the indicator function, see page 18 to view how to
turn on the indicator.
Step 1 Entering the Expiration Date Setting
Press and hold the
3 seconds to enter the expiration date settings. After all segments
flash across the screen, "EP" will be displayed on the screen.
Press the button to set the strip expiration date.
Note:
The strip expiration date is printed on the test strip vial.
Step 2 Setting the Year
A number indicating the year will blink.
Press the button until the correct
year appears.
Press the button to confirm the
year and set the month.
button is pressed for 3 seconds, the
and button at the same time for
43