Setting Up Your System - i-SENS GM505PAD User Manual

Setting Up Your System

Press and hold the S button for 3 seconds to enter the SET
mode. After all settings are finished, press and hold the S button
for 3 seconds to turn off the meter.
Press or to change values. Press and hold to scroll faster.
Adjusting the Date and Time
Step 1 Entering the SET Mode
Press and hold the S button for 3 seconds
to enter the SET mode. After all the
segments flash across the screen, 'SET' will
be displayed on the screen.
Press the S button again to go to the next
step.
Step 2 Setting the Year
Press and release or to adjust until
the correct year appears. Press and hold
button to scroll through the numbers
quickly. After setting the year, press the S
button to confirm your selection and go
to the next step.
14 www.i-sens.com
Step 3 Setting the Month
A number indicating the month will blink
on the left corner of the screen. Press or
until the correct month appears. Press the S
button to confirm your selection and go to
the next step.
Step 4 Setting the Date
Press or until the screen displays the
correct date. Press the S button to confirm
the date and go to the next step.
Step 5 Setting the Time Format
The meter can be set in the AM/PM 12-hour
or the 24-hour clock format. Press or to
select a format. The AM/PM is not displayed
in the 24-hour format.
After selecting the format, press the S button
to go to the next step.
www.i-sens.com 15