Setting Up Your System; Setting Up Bluetooth - i-SENS CareSens Dual User Manual

Setting Up Your System

Press and hold the
After all settings are finished, press and hold the
3 seconds to turn off the meter.
Press , to change values. Press and hold
◀ ▶
faster.
Step 1 Entering SET Mode
Press and hold the
3 seconds to enter the SET
Mode. After all the segments
flash across the screen, the
'SET' will show up.
Press the or
◀ ▶
select 'YES' and press the
S
button to go to the next step.
Note:
Follow steps 2–3 to pair your meter and smartphone. Pairing
allows the meter to communicate wirelessly with your
smartphone. Ensure that devices are within the maximum
Bluetooth range (10 metres). Before pairing your meter and
smartphone, download and install the SmartLog mobile app on
your smartphone.

Setting Up Bluetooth

Step 2 Bluetooth Pairing
If you do not want to connect your meter
1
to your smartphone, press the
when the screen shows on the right. The
meter will go to Step 4 Year Setting Mode.
S
for 3 seconds to enter the SET Mode.
S
for
button to
S
S
button for
, to scroll
◀ ▶
button
www.i-sens.com 19