Chapter VI Data Dictionary Description
The data dictionary description only can be built by ECAT communication module,
CAN module doesn't have data dictionary.
6.1. Format Description
Index
Subindex
(hex)
(hex)
Index (hex): the index No. of object, a 4-bit hexadecimal system number.
Subindex (hex): the subindex No. of object, a 2-bit hexadecimal system number.
Object name: the name of object. For subindex, it is the name of subindex.
Default value: the value is configured by default.
Data range: for the object that only can be read, it is the read range. For the object
that can be read and written, it is the configuration range.
Data type: data type of object
Permission: it is used to determine the object that only can read or be read and
written.
6.2. Data Dictionary Overview
Below form shows all dictionary overviews of ZMIO310-ECAT communication module.
Note: the address of the expansion sub-module is numbered from 0 according to the
order of access to the coupler, for example, the first expansion sub-module connected to
the coupler has an address of 0, the second expansion sub-module has an address of 1,
and so on.
Index
5000h
ZMIO310 Vertical Bus Expansion Module User Manual V1.0
Object
Default
name
value
Subindex
-
Ser work mode for equipment.
00h
The category of work modes.
Recover to initial state when power off, or hold the state when
01h
power off.
Data
Data
Permission
range
type
Description