Wiring Method - Zmotion ZMIO310 Manual

it with a crimping pliers.
→Wire cable connection steps:
Press the spring of the terminal to insert the cable with the tubular pre-insulated
➢
terminal into the port.
Loosen the spring of the terminal, pull the cable lightly to check whether the cable is
➢
firmly connected.
→Note:
When routing terminal cables, avoid bundling them with cables with strong
➢
interference signals such as power cables, and route them separately.
In the case of serious electromagnetic interference on site, shielded cables should
➢
be selected to improve the anti-interference ability.
It is not recommended to use the same power supply for the coupler module and the
➢
expansion sub-module. Especially in the case of severe electromagnetic interference
on site, different power supplies must be used and they must not share the same
ground.

4.1.5. Wiring Method

→ Input Terminal NPN Wiring:
ZMIO310 Vertical Bus Expansion Module User Manual V1.0