Table of Contents
Advertisement
Transfer media
Transfer distance
Process data
Synchronization shaking
of two slave stations
Refresh
→ Communication Cable Requirements
Both ETHERNET communication interface and EtherCAT communication interface
adopt standard Ethernet RJ45 interface.
The network cable adopts Category 5e STP, and the crystal head has a metal shell to
reduce interference and to prevent information from being eavesdropped. As shown below:
Item
Cable type
traverse
Line pairs
Isolation
Connector
Cable material
Cable length
Use RJ45 network cable connection method:
When installing, hold the crystal head that is with the cable and insert it into the RJ45
⚫
interface until it makes a "click" sound (kada).
In order to ensure the stability of communication, please fix the cables with cable ties.
⚫
⚫
When disassembling, press the tail mechanism of the crystal head, and pull out the
ZMIO310 Vertical Bus Expansion Module User Manual V1.0
It is less than 100M between 2 nodes
Maximum 1486 bytes of one single frame
For 1000 digital inputs and outputs, it is about 30us
Specification
Flexible crossover cable, Category 5e
twisted pair
cross skeleton
Crystal head with iron shell
Less than 100m
Cable
<1us
4
PVC
Advertisement
Table of Contents
