Table of Contents
Advertisement
Safety Statement
⚫
This chapter describes the safety precautions required for the correct use of this product. Before
using this product, please read the instructions for use and correctly understand the relevant
information on safety precautions.
⚫
This product should be used in an environment that meets the design specifications, otherwise
it may cause equipment damage or personal injury, and malfunctions or component damage
caused by failure to comply with relevant regulations are not within the scope of product quality
assurance.
⚫
Zmotion will not take any legal responsibility for personal safety accidents and property losses
caused by failure to comply with the contents of this manual or illegal operation of products.
Safety Level Definition
According to the level, it can be divided into "
may result in moderate injury, minor injury or equipment damage.
Please keep this guide in a safe place for reading when needed, and be sure to hand this manual to
the end user.
◆ When the controller is disassembled, all external power supplies used by the
◆ It is forbidden to use in the following places: places with dust, oil fume, conductive
Danger
◆ Avoid metal shavings and wire ends falling into the hardware circuit board during
◆ After installation, ensure that there are no foreign objects on the hardware circuit
Notice
◆ When installing, make it tightly and firmly with the mounting frame.
system should be disconnected before operation, otherwise it may cause
misoperation or damage to the equipment.
dust, corrosive gas and flammable gas; places exposed to high temperature,
condensation, wind and rain; places with vibration and shock. Electric shock, fire
and misuse can cause product damage and deterioration.
installation.
board.
Danger
" and "
Caution
Install
". Failure to operate as required
Advertisement
Table of Contents
