General Information; Use Of This Manual - Pace PROGRAMMABLE THERMOFLO Operation & Maintenance Manual

The information contained in this manual will provide the user with the knowledge necessary to properly operate
and maintain the PACE Programmable ThermoFlo Unit. To fully utilize the features of the system, PACE
strongly recommends that the user read and fully understand the "Process Development" and "Operation"
portions of this manual. If you encounter any difficulty operating your system, call your local authorized PACE
dealer or contact PACE Customer Support directly at Tel. (301) 490-9860 or FAX (301) 604-8782.
The ThermoFlo Unit is easy to operate and can be quickly set up for use
in Manual mode or Timed mode of operation. To begin operation of
your new unit quickly, perform the Set-Up and Quick Start procedures
detailed on pages 10-21 of this manual. The Quick Start section of this
manual provides condensed procedures for using the Manual or Timed
modes of operation. Also detailed in the Quick Start section is a quick
reference flow chart to use in the Program Mode when utilizing rework
profiles developed and stored in unit memory by your company.

GENERAL INFORMATION

USE OF THIS MANUAL

THERMOFLO QUICK START
1