Safety; Heading Guidelines - Pace PROGRAMMABLE THERMOFLO Operation & Maintenance Manual

SAFETY

The purpose of this "SAFETY" section is to inform users of the heading guidelines used in this manual to indicate
special Notes, Cautions, Warnings or Dangers. Also included are precautions which must be observed when
operating or servicing this product.

HEADING GUIDELINES

PACE adheres to the following Heading Guidelines (based on OSHA guidelines) when listing special information
or precautions to be taken. Especially important are all procedures and practices which, if not strictly observed,
could result in injury or loss of life.
These "NOTES", "CAUTIONS","WARNINGS" and "DANGERS" are inserted in this manual whenever deemed
necessary. They appear in a blocked off form with outline and a shaded background to highlight the information
as shown below.
NOTE
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
NOTE
Used to indicate a statement of company recommendation or policy. The message may relate directly or
indirectly to the safety of personnel or protection of property. NOTE is not associated directly with a hazard or
hazardous situation and is not used in place of "CAUTION", "WARNING" or "DANGER".
CAUTION
Used to indicate a hazardous situation which may result in minor or moderate injury. May also be used to alert
personnel to conditions, procedures and practices which, if not observed, could result in damage to or destruction
of the product or other equipment.
WARNING
Used to define additional information that if not closely followed might result in serious damage to equipment
and represent a potential for serious personnel injury.
DANGER
Defines additional information that if not closely followed might result in severe personnel injury or death.
Danger is not used for property damage unless personal injury risk is present.
8