OPERATION
TIMED MODE OF OPERATION
The Timed Mode offers added process control with the addition of a user-specified cycle time and automatic
vacuum pickup/release.
TIMED COMPONENT REMOVAL
The ThermoFlo System Work Platform (PACE part number 6018-0099) is
optionally available to assist in the installation/removal process.
1. Install the proper Nozzle and Vacuum Cup onto the handpiece.
2. Set the unit POWER Switch (on rear panel of power source) to the ON position.
3. Press and release MODE/ESC Key as necessary until the TIMED Mode
REMOVE Light is illuminated.
40
NOTE
Figure 39.
Figure 40.