Fixture Information; Special Functions; Manual Operation - SHOWTEC 34014 User Manual

Table of Contents

Advertisement

ACT Fresnel 50 RGBAL incl. barndoor

Fixture Information

In this menu you can view the UID (No function), the LED operating hours and the firmware version of the
device.
Press the UP/DOWN buttons to select one of the following 3 options:
UID:
Fixture Use Time:
Firmware Version:

Special Functions

In this menu you can reset the settings of the device to the default factory settings.
Press the ENTER button to open the pop-up submenu for the factory settings:
Press the UP/DOWN buttons to select between NO and YES. If you select YES, the device's settings will
be reset to the default factory settings.
Press the ENTER button to confirm.

Manual Operation

To operate the device manually with the Manual dimmer / Preset Color control (16):
Select Knob in the Mode pop-up submenu. See 6.6.2.1. Function Mode on page 26 for more
information.
Exit the submenu and return to the start screen. The start screen shows:
To switch between the Manual dimmer and Preset Color mode press the Manual dimmer / Preset
Color control (19).
Turn the Manual dimmer / Preset Color control (19) to adjust the intensity of the light. The adjustment
range is between 0 and 255 (from 0 to 100 %). The current value of the dimmer is displayed on the
screen.
Turn the Manual dimmer / Preset Color control (19) to select one of the preset color macros. The
following options are available: red, green, blue, amber, lime, yellow, light blue, purple, 2800 K, 3200
K, 3600 K, 4000 K, 4400 K, 4800 K, 5200 K, 5600 K, 6000 K, 6600 K, 7200 K, 8000 K and 10000 K. The
current color is displayed on the screen.
Note:
The Manual dimmer / Preset Color control (19) is functional, even if you do not exit the menu and
return to the start screen.
It is not possible to add strobe effect in this mode.
Product code: 34014
The display shows the device UID.
See 6.9. RDM Information on page 32 for more information
Provides information about the total hours of operation of the LEDs
Shows the current firmware version
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Act fresnel 50 rgbal incl. barndoor

Table of Contents