Table of Contents
Advertisement
ACT Profile 50 RGBAL
Fixture Information
In this menu you can view the UID (No function), the LED operating hours and the firmware version of the
device.
Press the UP/DOWN buttons to select one of the following 3 options:
●
UID:
●
Fixture Use Time:
●
Firmware Version:
Special Functions
In this menu you can reset the settings of the device to the default factory settings.
Press the ENTER button to open the pop-up submenu for the factory settings:
Press the UP/DOWN buttons to select between NO and YES. If you select YES, the device's settings will
be reset to the default factory settings.
Press the ENTER button to confirm.
Manual Operation
To operate the device manually with the Manual dimmer / Preset Color control (19):
Select Knob in the Mode pop-up submenu. See 6.6.2.1. Function Mode on page 29 for more
information.
Exit the submenu and return to the start screen. The start screen shows:
To switch between the Manual dimmer and Preset Color mode press the Manual dimmer / Preset
Color control (19).
Turn the Manual dimmer / Preset Color control (19) to adjust the intensity of the light. The adjustment
range is between 0 and 255 (from 0 to 100 %). The current value of the dimmer is displayed on the
screen.
Turn the Manual dimmer / Preset Color control (19) to select one of the preset color macros. The
following options are available: red, green, blue, amber, lime, yellow, light blue, purple, 2800 K, 3200
K, 3600 K, 4000 K, 4400 K, 4800 K, 5200 K, 5600 K, 6000 K, 6600 K, 7200 K, 8000 K and 10000 K. The
current color is displayed on the screen.
Note:
●
The Manual dimmer / Preset Color control (19) is functional, even if you do not exit the menu and
return to the start screen.
●
It is not possible to add strobe effect in this mode.
Product code: 34033
The display shows the device UID.
See 6.9. RDM Information on page 35 for more information
Provides information about the total hours of operation of the LEDs
Shows the current firmware version
32
Advertisement
Table of Contents
