UDO AUDIO SUPER 6 Owner's Manual page 99

NAVIGATION
IMPORTANT SAFETY
INSTRUCTIONS
ACKNOWLEDGEMENTS
INTRODUCTION
OVERVIEW
QUICK START
UPDATING THE FIRMWARE
CONNECTIONS
SOUND DESIGN &
PROGRAMMING
EFFECTS
PERFORMANCE CONTROL
SECTION (KEYBOARD
MODEL)
ADDITIONAL CONTROLS &
PARAMETERS (DESKTOP
MODEL)
USING THE MODULATION
MATRIX
VOICE ASSIGN
ARPEGGIATOR &
SEQUENCER
GLOBAL SETTINGS
MPE SUPPORT
FILE MANAGEMENT
HOW-TO GUIDE
CHEAT SHEET
MIDI SPECIFICATIONS
GLOSSARY
SUPPORT INFORMATION
ON: Press this button to turn the sequencer on or off. When the LED of
this button is lit, the sequencer is active, unless MODE is set to one of the
arpeggiator playback modes, in which case arpeggiator mode is selected.
RANGE: In sequencer mode, this button enables you to jump to the
following pages of the step sequence:
• 1: The 16 buttons display page 1 of the sequence: steps 1-16. This is
the default page when you enter sequencer mode.
• 2: The 16 buttons display page 2 of the sequence: steps 17-32.
• 3: The 16 buttons display page 3 of the sequence: steps 33-48.
• 4: The 16 buttons display page 4 of the sequence: steps 49-64.
MODE: Selecting the option SEQ enables sequencer mode. For all other
playback modes related to the arpeggiator, see page 97.
SEQ REC: Pressing this button once, arms the sequencer for recording.
Its LED will then flash, indicating that you are now in recording mode. By
repeatedly pressing this button, you can step through the five available
sequencer tracks. As you select one of the options, the sequence of steps
represented by the 16 buttons will update accordingly.
The SEQ REC button and the five track LEDs that indicate which track is currently selected.
These are the sequencer tracks you can select using the SEQ REC button:
• STEP: This track is selected by default when you enter sequence
recording mode. It allows you to record notes or chords step by step.
Before you can start recording, press the step button you wish to start
from – in most cases this will be the first step. The respective LED
will then start flashing to indicate that this step is ready for recording.
Steps are recorded as soon as you start playing notes. A note or chord
is recorded after you released all keys. The sequencer then advances
to the next step. Recorded steps are represented by lit LEDs.
UDO Super 6 — Owner's Manual 99