UDO AUDIO SUPER 6 Owner's Manual page 49

NAVIGATION
IMPORTANT SAFETY
INSTRUCTIONS
ACKNOWLEDGEMENTS
INTRODUCTION
OVERVIEW
QUICK START
UPDATING THE FIRMWARE
CONNECTIONS
SOUND DESIGN &
PROGRAMMING
EFFECTS
PERFORMANCE CONTROL
SECTION (KEYBOARD
MODEL)
ADDITIONAL CONTROLS &
PARAMETERS (DESKTOP
MODEL)
USING THE MODULATION
MATRIX
VOICE ASSIGN
ARPEGGIATOR &
SEQUENCER
GLOBAL SETTINGS
MPE SUPPORT
FILE MANAGEMENT
HOW-TO GUIDE
CHEAT SHEET
MIDI SPECIFICATIONS
GLOSSARY
SUPPORT INFORMATION
• Middle position: With this setting, the shape of envelope 1 is inverted.
An envelope that is ramping up during its attack stage will now ramp
down. The effect on the modulation destination is the opposite of
envelope 1 modulating in default mode.
• Upper position: With this setting, envelope 1 operates in loop mode.
Instead of being triggered just once, the attack, decay hold and decay
stages are repeated indefinitely until you release a key. As soon as
you release a key, the release stage is triggered. The rate at which the
looped envelope is repeated is indicated by the LED graphically linked
to the LOOP label.
In loop mode, the sustain setting determines from what level the
envelope rises at the beginning of the attack stage and to what level
it falls at the end of the decay stage.
Amplitude
ATTACK HOLD
sustain level
Envelope 1 in loop mode.
UDO Super 6 — Owner's Manual
ATTACK DECAY HOLD
however long you
press down a key
DECAY RELEASE
as soon as you
release all keys
Duration
49