UDO AUDIO SUPER 6 Owner's Manual page 31

NAVIGATION
IMPORTANT SAFETY
INSTRUCTIONS
ACKNOWLEDGEMENTS
INTRODUCTION
OVERVIEW
QUICK START
UPDATING THE FIRMWARE
CONNECTIONS
SOUND DESIGN &
PROGRAMMING
EFFECTS
PERFORMANCE CONTROL
SECTION (KEYBOARD
MODEL)
ADDITIONAL CONTROLS &
PARAMETERS (DESKTOP
MODEL)
USING THE MODULATION
MATRIX
VOICE ASSIGN
ARPEGGIATOR &
SEQUENCER
GLOBAL SETTINGS
MPE SUPPORT
FILE MANAGEMENT
HOW-TO GUIDE
CHEAT SHEET
MIDI SPECIFICATIONS
GLOSSARY
SUPPORT INFORMATION
In the first example, waveform 6 is loaded:
In the second example, waveform 25 is loaded:
To load alternative waveforms:
1. Press WAVE or move the DDS 1 waveform rotary switch to the
rightmost position. The LED of the WAVE button will start flashing,
indicating that you are now in waveform selection mode.
2. Play some notes and press one of the select buttons (W1-W16)
once or twice to load a waveform.
3. Press the PATCH button to exit wave mode.
Each patch remembers the alternative waveforms it was saved
with. Even if you replaced all alternative waveforms the Super 6 is
shipped with, the factory patches wouldn't change.
When you switch from patch to manual mode, the alternative
waveform from the previously loaded patch will be retained for DDS
1.
UDO Super 6 — Owner's Manual 31