UDO AUDIO SUPER 6 Owner's Manual page 93

12 voice binaural analog-hybrid synthesizer
Hide thumbs Also See for SUPER 6:
Table of Contents

Advertisement

NAVIGATION
IMPORTANT SAFETY
INSTRUCTIONS
ACKNOWLEDGEMENTS
INTRODUCTION
OVERVIEW
QUICK START
UPDATING THE FIRMWARE
CONNECTIONS
SOUND DESIGN &
PROGRAMMING
EFFECTS
PERFORMANCE CONTROL
SECTION (KEYBOARD
MODEL)
ADDITIONAL CONTROLS &
PARAMETERS (DESKTOP
MODEL)
USING THE MODULATION
MATRIX
VOICE ASSIGN
ARPEGGIATOR &
SEQUENCER
GLOBAL SETTINGS
MPE SUPPORT
FILE MANAGEMENT
HOW-TO GUIDE
CHEAT SHEET
MIDI SPECIFICATIONS
GLOSSARY
SUPPORT INFORMATION
• 1 LED: With this setting, 3 binaural voices will be stacked.
• 2 LEDs: With this setting, 6 binaural voices will be stacked.
• 3 LEDs: With this setting, 6 binaural voices will be stacked as an
octave.
• 4 LEDs: With this setting, 6 binaural voices will be stacked as an
octave and a fifth.
• 5 LEDs: With this setting, 6 binaural voices will be stacked as a major
chord.
BINAURAL: Use this button to turn binaural mode on or off. The Super 6
defaults to binaural mode, in which its 12 voices are twinned to form six
stereo 'super voices'.
The left and right channels are assigned a complete synthesizer voice.
Starting with the stereo oscillators, parameters of both channels of each
'super voice' may be independently controlled, enabling you to create
gorgeous stereo images.
When binaural mode is disabled, the Super 6 switches to a monaural
signal path with 12 voices.
In non-binaural mode, the LR PHASE fader in the LFO 1 section turns
into a pan spread control (PAN), allowing you to adjust how far the non-
binaural voices are spread in the stereo panorama. At its lowest setting, all
voices are almost centred. At its highest setting, all voices are alternately
hard-panned between the left and right channels.
To achieve a true monaural signal:
1. Connect only the left audio output to your mixer or audio interface.
2. Disable binaural mode in either voice assign mode POLY 1 or POLY
2.
3. Once the Super 6 is set to non-binaural mode, set LR PHASE (or
PAN in this mode) to 100%. If you set PAN below 100% in non-
binaural mode, this will result in phase cancellation every time the
signals of both audio channels 'overlap'.
UDO Super 6 — Owner's Manual
93

Advertisement

Table of Contents
loading

Related Products for UDO AUDIO SUPER 6

Table of Contents