Table of Contents
Advertisement
NAVIGATION
IMPORTANT SAFETY
INSTRUCTIONS
ACKNOWLEDGEMENTS
INTRODUCTION
OVERVIEW
QUICK START
UPDATING THE FIRMWARE
CONNECTIONS
SOUND DESIGN &
PROGRAMMING
EFFECTS
PERFORMANCE CONTROL
SECTION (KEYBOARD
MODEL)
ADDITIONAL CONTROLS &
PARAMETERS (DESKTOP
MODEL)
USING THE MODULATION
MATRIX
VOICE ASSIGN
ARPEGGIATOR &
SEQUENCER
GLOBAL SETTINGS
MPE SUPPORT
FILE MANAGEMENT
HOW-TO GUIDE
CHEAT SHEET
MIDI SPECIFICATIONS
GLOSSARY
SUPPORT INFORMATION
LFO 1: This fader controls the amount of pitch modulation by LFO 1.
ENV 1: This fader controls the amount of pitch modulation by envelope 1.
The oscillator selector toggle switch allows you to select the modulation
destination for pitch modulation controlled by LFO 1 and/or envelope 1:
• DDS 1: With this setting, the modulation is mapped to DDS 1.
• 1 + 2: With this setting, the modulation is mapped to both oscillators.
• DDS 2: With this setting, the modulation is mapped to DDS 2.
Binaural pitch modulation controlled by LFO 1 can only be achieved
with DDS 2 because its phase is reset to zero each time you play
a note, whereas DDS 1 is free-running. When an oscillator is free-
running, there is no fixed starting point from which to offset its
phase.
The super mode, super wave modulation and pulse width controls in the DDS Modulator section.
The SUPER (DDS 1) toggle switch enables you to activate super mode.
Super mode is a unique feature that takes advantage of the Super 6's
stereo signal path and the fact that DDS 1 contains seven free-running
oscillators: a centroid oscillator and six 'sister' oscillators. In both available
super modes, DDS 1's six 'sister' oscillators can be dynamically de-
phased in the stereo field, resulting in wide and thick single oscillator
sounds. You have the choice between three options:
• OFF: Selecting this option disables super mode. In this mode, the
DETUNE and SWM parameters have no effect.
UDO Super 6 — Owner's Manual
61
Advertisement
Table of Contents
