UDO AUDIO SUPER 6 Owner's Manual page 37

NAVIGATION
IMPORTANT SAFETY
INSTRUCTIONS
ACKNOWLEDGEMENTS
INTRODUCTION
OVERVIEW
QUICK START
UPDATING THE FIRMWARE
CONNECTIONS
SOUND DESIGN &
PROGRAMMING
EFFECTS
PERFORMANCE CONTROL
SECTION (KEYBOARD
MODEL)
ADDITIONAL CONTROLS &
PARAMETERS (DESKTOP
MODEL)
USING THE MODULATION
MATRIX
VOICE ASSIGN
ARPEGGIATOR &
SEQUENCER
GLOBAL SETTINGS
MPE SUPPORT
FILE MANAGEMENT
HOW-TO GUIDE
CHEAT SHEET
MIDI SPECIFICATIONS
GLOSSARY
SUPPORT INFORMATION
To adjust the input gain of an external audio signal:
1. Press SHIFT.
2. Turn the MIX control to adjust the input gain.
3. Press SHIFT again to return to editing your sound.
If you don't manually adjust the input gain, the gain will default to a line
input level that will make an external audio signal as loud as the Super 6's
oscillator signals.
The audio input also features a gate trigger detector so that the envelopes
and LFO 1 in reset mode are triggered when an incoming audio signal
reaches a threshold determined by the input gain level. The LED to the
left of envelope 1 indicates when an external audio signal passes the
threshold. It lights up every time a trigger impulse is received.
UDO Super 6 — Owner's Manual 37