After Finishing Work - Stihl SGA 85 Instruction Manual

17 After Finishing Work

16.2 Activating and Locking the Trig‐
ger Switch
The sprayer is designed for one-handed opera‐
tion.
Activating the trigger switch
To pull the trigger switch:
1
► Slide the retaining latch (1) to the
► Press and hold the trigger switch (2) to start
spraying.
Locking the trigger switch
To lock the trigger switch:
1
► Release the trigger switch (2).
► Slide the retaining latch (1) to the
lock the trigger switch.
For optimum performance, observe the recom‐
mended ambient temperature ranges,
16.3 Adjusting Operating Pressure
and Flow Rate
To adjust the nozzle with the different flow rate,
23.2:
1
0458-600-8221-B
2
position.
2
position to
23.5.
2
To increase operating pressure and flow rate
spray:
► Turn rotary control (1) toward "Max."
To reduce operating pressure and flow rate:
► Turn rotary control toward "Min."
Operating pressure is indicated on the spray
gun's pressure gauge (2).
16.4 Adjusting the Nozzle
To adjust the nozzle with the different flow rate,
23.2:
A
For the full cone beam (A):
► Turn the nozzle as far as stop counterclock‐
wise.
For the spot beam (B):
► Turn the nozzle one complete turn clockwise
from the closed position.
17 After Finishing Work
17.1 Preparing for Transportation or
Storage
WARNING
■ To reduce the risk of personal injury from unin‐
tended activation or unauthorized use, switch
off the sprayer and remove the battery before
transporting the sprayer.
To prepare the sprayer for transportation or stor‐
age:
► Switch off the sprayer,
► Remove the battery,
► Squeeze the trigger switch to relieve any
remaining the pressure in the system,
► Lock the trigger switch,
► Drain the container in an environmentally
responsible manner,
► Rinse the container with clean water.
► Fill the container with clean water,
► Insert the battery,
► Switch on the sprayer,
► Unlock the trigger switch,
English
B
14.2.
13.2.
16.2.
16.2.
16.1.2.
16.1.1.
13.1.
14.1.
16.2.
19