Table of Contents
Advertisement
English
Working pressures / spray rates – see "Specifi‐
cations".
8
After Spraying
► Empty the container in a well ventilated loca‐
tion.
► Rinse the container with clean water.
► Fill the container with clean water.
► Fit the cap on the container and tighten it
down firmly.
► Pressurize the container and continue spray‐
ing until the container is empty and no longer
under pressure.
9
Storing the Machine
► Secure the unit against unauthorized use.
► Dry the unit and store it in a place protected
from direct sunlight and frost.
10 Inspection and Mainte‐
nance by User
10.1
Greasing the piston packing
Removal
► Unscrew the pump tube from the container
The pump cover can be opened using a 1/2"
ratchet wrench.
► Grease piston packing with a lubricating
grease
10
Installing
► Screw the pump tube into the container until
the lug (arrow) engages in the toothing.
10.2
Oil pump rod
► Apply a few drops of resin-free oil to the pump
rod
10.3
Greasing the bearing of the
pump lever
► Grease the bearing of the pump lever
8 After Spraying
0458-597-0121-C
Advertisement
Table of Contents
